Intel(R) QSFP+ Configuration Utility Release Notes
==================================================
June 30, 2015


Contents
========

- OVERVIEW
- SUPPORTED OPERATING SYSTEMS
- RUNNING THE UTILITY
   - OPTIONS
   - BASIC USAGE EXAMPLE
   - EXIT CODES
- CUSTOMER SUPPORT
- LEGAL


OVERVIEW
========
The Intel(R) QSFP+ Configuration Utility is a command line utility that allows
users to change the link type of the installed QSFP+ module. The supported
types are defined within the adapter's NVM. This utility displays only the
devices that potentially support QSFP+ reconfiguration. Only one port per
device is displayed, since changes affect the device as a whole, not
individual ports.

NOTE: A reboot is required to apply configuration changes.


SUPPORTED OPERATING SYSTEMS
===========================
The Intel(R) QSFP+ Configuration Utility runs on the following operating
systems:
- Red Hat* Enterprise Linux* 6.5, 7.0
- Suse* Linux ES 10 SP4, 11 SP3 (SP3-IA64)
- Solaris* 11 SPARC, x86-64
- UEFI 2.1-IPF, 2.3, 2.3-IPF, 2.4
- Microsoft* Windows Server* 2008 R2, 2008 R2 Core, 2012, 2012 R2, 2012 Core, 2012 R2 Core
- Windows PE 3.0 (2008 R2 PE), 4.0 (2012 PE), 5.0 (2012 R2 PE)
- VMware* ESXi 5.5

NOTES: For Linux, ESXi, and Solaris, the appropriate base driver must be
       installed.

       For Windows, the iqv driver must be installed.


RUNNING THE UTILITY
===================
Using the "/?" or "/HELP" option will display a list of supported command line
options.

NOTE: The utility must be run with root/administrator privileges.

OPTIONS:
--------
The Intel(R) QSFP+ Configuration Utility can be run with any of the following
command line options.
NOTE: The dash '-' character can be used in place of the slash '/' character.
NOTE: All options are case-sensitive.

  /HELP or /?
    Displays command line help.

  /VERSION
    Displays tool version information.

  /EXITCODES
    Displays exit code help.

  /DEVICES
    Displays supported devices present in the system.
    NOTE: The value "N/A" is displayed in the Mode column if the hardware
          supports QSFP+ configuration but the current firmware does not.
          See BASIC USAGE EXAMPLES below.

  /NIC=XX
    Selects a specific adapter (1-32).

  /INFO
    Displays supported QSFP+ link modes. Use only with /NIC.

  /SET [LINK MODE]
    Configures selected QSFP+ link mode. Use only with /NIC.
    NOTE: You must reset the platform for the changes to take effect.


BASIC USAGE EXAMPLES
--------------------
The following examples show the tool's output for the /DEVICES option,
the /INFO option, and the /SET option.

/DEVICES:
---------
QCU>QCUW64E.EXE /DEVICES


NIC B:D   Ven-Dev   Mode  Adapter Name
=== ===   ========= ===== ============================================
1)  01:00 8086-1584 4x10  Intel(R) Ethernet Controller XL710 for 40GbE QSFP+
2)  04:00 8086-1583 N/A   Intel(R) Ethernet Controller XL710 for 40GbE backplan


/INFO:
------
> QCUW64E.EXE /NIC=3 /INFO

Intel(R) QSFP+ Configuration Utility vXX.XX.XX.XX
Copyright (C) 2015 by Intel Corporation.
Software released under Intel Proprietary License.

Adapter supports QSFP+ Configuration modification.
Current Configuration: 1x40
Supported Configurations: 1x40, 4x10


/SET:
-----
> QCUW64E.EXE /NIC=3 /SET 4x10

Intel(R) QSFP+ Configuration Utility vXX.XX.XX.XX
Copyright (C) 2015 by Intel Corporation.
Software released under Intel Proprietary License.

QSFP+ configuration changed. Please reset platform for the changes to take effect.


EXIT CODES:
-----------
The Intel(R) QSFP+ Configuration Utility returns exit codes to the command line.
A description of each of these codes can be found in the tool by running QCU /EXITCODES.


CUSTOMER SUPPORT
================

- Main Intel web support site: http://support.intel.com

- Network products information: http://www.intel.com/network


Legal / Disclaimers
===================

Copyright (C) 2014-2015, Intel Corporation.  All rights reserved.

Intel Corporation assumes no responsibility for errors or omissions in this
document.  Nor does Intel make any commitment to update the information
contained herein.

Intel is a trademark of Intel Corporation in the U.S. and/or other countries.

*Other names and brands may be claimed as the property of others.

This software is furnished under license and may only be used or copied 
in accordance with the terms of the license.  The information in this 
manual is furnished for informational use only, is subject to change 
without notice, and should not be construed as a commitment by Intel 
Corporation.  Intel Corporation assumes no responsibility or liability 
for any errors or inaccuracies that may appear in this document or any 
software that may be provided in association with this document.  Except 
as permitted by such license, no part of this document may be reproduced, 
stored in a retrieval system, or transmitted in any form or by any means 
without the express written consent of Intel Corporation.
